Electrical diagram of the interior lighting of the trunk of the car and door switches of the Audi 100. Electrical circuit of the interior lighting of the trunk of the car and door switches of the Audi 100.
The wiring of the car burns out over time and requires repair, for this we have presented a detailed diagram that shows all the connections of the door sensors and the trunk lighting lamp. Before proceeding with its repair, be sure to disconnect the “-” terminal from the storage battery, and put the parking brake on the car. Insulate all wires and contacts with a special tape.
If you are interested in other electrical diagrams of the Audi 100, then see them here, at the bottom of the article there is a whole list of them, as well as all the symbols on the diagrams are explained.
The scheme of the interior lighting of the trunk of the car and door switches:
| S4 - fuse in the Audi 100 block; | F2 - door switch (front left) with a contact for a sound signal; |
| T4 - 4-pin connector located behind the dashboard (black); | F3 - door switch (front right); |
| T5 - 5-pin connector located behind the dashboard (black); | F5 - switch for lighting the trunk of the Audi 100; |
| T10с - 10-pin connector located behind the dashboard (black); | F10 - door switch (rear left); |
| 81 - connection with "mass" 1 in the wiring harness of the instrument panel; | F11 - door switch (rear right); |
| 87 - connection to "mass" 1 in the rear wiring harness; | W - front lamp for interior lighting; |
| A23 - "positive" connection (30a1) in the wiring harness of the instrument panel; | W3 - lamp for lighting the trunk of the car. |
| Q20 - connection 1 (door switch) in the power window wiring harness; |
Audi
